A tester sur le modem thomson tg788 d'OVH, via telnet ou import de configuration, activer l'affichage des password dans le source pour récupérer le password SIP":
DisplayPasswords ???

cwmp config
Configure the cwmpd as seen from the ACS.
Syntax : config [state = <{disabled|enabled}>] [mode = <{read-only|full}>]
[periodicInform = <{disabled|enabled}>]
[periodicInfInt = <number>] [periodicInfTime = <string>]
[sessionTimeout = <number>] [noIpTimeout = <number>]
[maxEnvelopes = <number>]
[connectionRequest = <{disabled|enabled}>]
[connectionReqPath = <string>]
[connectionReqUserName = <quoted string>]
[connectionReqPsswd = <password>]
[connectionReqAuth = <{none|basic|digest}>]
[bootdelayrange = <number>]
[upgradedelay = <{disabled|enabled}>]
[delaytimeoutaction = <{force|cancel}>]
[am1Termination = <{disabled|enabled}>]
[persistentSubscription = <{disabled|enabled}>]
[connectionReqThrotNumber = <number>]
[connectionReqThrotTime = <number>]
[showPasswords = <{disabled|enabled}>] [urlSource = <{none}>]

Parameters :
[state = <{disabled|enabled}>]
The state of the cwmp daemon.
[mode = <{read-only|full}>]
Set the operation mode of the cwmp daemon.
[periodicInform = <{disabled|enabled}>]
Set periodicInform flag of the cwmp daemon.
[periodicInfInt = <number>]
Set the interval between two periodicInform messages in seconds.
[periodicInfTime = <string>]
Set the UTC time the periodic inform will be synchronized upon.
[sessionTimeout = <number>]
Set HTTP session-timeout in seconds.
[noIpTimeout = <number>]
Set time (in seconds) ip may be 0 after uploading new config file. Modem
will step back to old configuration when timeout is reached.
[maxEnvelopes = <number>]
Set the maximum number of SOAP envelopes send within one http-message.
[connectionRequest = <{disabled|enabled}>]
Set connection request flag of the cwmp daemon.
[connectionReqPath = <string>]
Set the path where the cwmp daemon can be reached.
[connectionReqUserName = <quoted string>]
Set the username the ACS must use to log in.
[connectionReqPsswd = <password>]
Set the password the ACS must use to log in.
[connectionReqAuth = <{none|basic|digest}>]
Set the authentication type of modem CWMP server for asynchronous
connects.
[bootdelayrange = <number>]
Set the delay on boot before inform is sent.
[upgradedelay = <{disabled|enabled}>]
Set whether to delay upgrade if statecheck is active.
[delaytimeoutaction = <{force|cancel}>]
Set the action to perform when statecheck goes into timeout.
[am1Termination = <{disabled|enabled}>]
Set if am 1 session termination is enabled.
[persistentSubscription = <{disabled|enabled}>]
The cwmp daemon has persistent subscriptions.
[connectionReqThrotNumber = <number>]
Set the connection request throttling maximum number of accepted requests
within period.
[connectionReqThrotTime = <number>]
Set the connection request throttling period in seconds in which max
requests is reached.
[showPasswords = <{disabled|enabled}>]
Show all passwords in IGD as plaintext. When 0 then will be emptie
stringed as the standard requests.
[urlSource = <{none}>]
The name of DHCP client which the URL comes from.
[rpcupload = <{(HIDDEN)}>]
(HIDDEN)